The BarDIMM Box comes pre-loaded with the latest firmware. Some firmware updates may be needed due to new features or fixes.
The firmware can also be upgraded by flashing the firmware files directly using a USB memory stick attached to the BarDIMM Box, or by using the BarDIMM Box CLE (Command Line Interface).
Upgrading BarDIMM Pro firmware using a USB stick
To update the BarDIMM firmware, copy the fw file to the USB Stick.
Follow the below steps for flashing:
- Format the USB memory stick to FAT32.
- Copy the firmware files to the root directory of the blank USB memory stick.
- Switch off the BarDIMM Box.
- Insert that memory stick in the USB host port of the BarDIMM Box.
- Switch on the BarDIMM Box. The update begins automatically.
- The green LED will blink (between 5 and 15based on the update content).
- Once the update is complete, the LED indicator on the CSA changes to a steady green light.
- Remove the USB memory stick
Error codes
| Red LED blinks 4 time with 4 short beeps | Printer MAC Address not found in the manifest file |
| Red LED blinks 6 time, with 6 long beeps | The manifest file is corrupted or empty |
| Red/Green/Red LED blink with 3 short beeps | No firmware file for the BarDIMM Box (lack of support contract or file not found) |
Need more help with this?
BarDIMM support portal