Powering the BarDIMM Box

Powered by the Printer USB Connector

• Short cable to power from Printer USB.
• 5v USB power is necessary.
• No need for external power supply.
• No extra wall plug required.
• BarDIMM Box is OFF when printer is OFF.
• The printer needs to keep the USB port powered during (deep) sleep mode
• BarDIMM Box needs up to 120s to boot.
  bc.
  
  
  
  
  
  
  

Powered by an external power supply (P/N JM30210)

• 5 to 12v 2A external power supply.
• C14 output
• C14 Y cable to get power from the printer existing power cable
• BarDIMM Box is not OFF when printer is OFF.
• Spare wall plug required.
  

Note: Electrostatic Discharges (ESD) will not damage the Smart Appliance but may reboot in case of very high intensity.