1-D BARCODES:
Bar spacing
| bar spacing, first (thin) width in dots (1/600 inch) | |
| bar spacing, second width in dots (1/600 inch) | |
| bar spacing, third width in dots (1/600 inch) | |
| bar spacing, fourth width in dots (1/600 inch) |
Example
Thin bars spacing 4 dots, thick bars spacing 8 dots: 4,8s
2-D BARCODES:
PDF417
Symbol format parameters
| Symbol black/white module height compared to the width. Unit=minimum module width (default=3) | |
| X parameter for the symbol X/Y size ratio (default: 2 for 2/3) | |
| Y parameter for the symbol X/Y size ratio (default: 3 for 2/3) | |
| Symbol module min width (1 to 100), Unit=1/100 inch (default value=10) | |
| The width value triggers a predefined scaling of the base barcode. |
Example:
Square PDF, minimum module width, smaller module size: 1,1,1,5s
Data Matrix, QRCode
Symbol format parameters
| Small module height in dots (1/600 inch) |
QRCode
Symbol format parameters
| .#1 | Symbol set for input data |
| 0 : Use default (Automatic: JIS/ShiftJIS) | |
| 1 : Numeric (0to9) | |
| 2 : Alphanumeric (0to9, uppercase A to Z, space $%*+-. /: ) | |
| 3 : Binary 8-bits/byte data (JIS 8-bit character set (Latin and Kana) in accordance with JISX0201) | |
| 4 : Kanji characters (Shift JIS values 8140h to 9FFCh and E040h to EAA4h shifted from JIS X0208) |
Example:
Example: QRCode, alphanumeric data: 2s
OMR
OMR mark spacing in dots (1/600 inch). Default value=85 (1/7 inch)
Need more help with this?
BarDIMM support portal