You can reset the BarDIMM Box to the factory defaults by using a paper clip in the reset pin hole on the front of the BarDIMM Box.
Insert carefully the paperclip wire in the hole until you hear a click, keep it pressed for 10 seconds, then release the pressure.
The BarDIMM Box red LED flashes to indicate the reset is currently under way.
The factory reset process is completed when the LED becomes green and takes around 50 seconds.
| Scenario | LED Behavior/Beep Activity |
|---|---|
| Factory Reset Response | Red LED flashing |
| BarDIMM Box is ready | Steady Green LED |
Need more help with this?
BarDIMM support portal